CHANZON 8mm Panel Mount + 5mm LED Green Pilot Light for Cars Boats

The mount hole diameter should be 0.31 inch or 8 mm, requiring a suitably sized hole of approximately 8 mm to be drilled. The wire details include 24-gauge pre-wired cable with a length of 7.9 inches or 20 cm.

The LED overview is as follows: a single-color green LED with a wavelength of 515-520 nm (centered around 520 nm), a luminous intensity (brightness) of 15,000-18,000 millicandelas, and a viewing angle of 30 degrees. The LED has a clear, transparent, round 5 mm small lens.

The operating voltage range is 12 V, with different brightness levels achievable using 5 V, 6 V, 9 V, or 12 VDC. The current draw is 20 mA, and the wattage is 0.24 W (or 0.25 W). The polarity is Anode "+" (green wire) and Cathode "-" (black wire).

The accompanying resistor is 560 Ω ohms, 1/4 W or 0.25 W, with a ±1% tolerance. The resistor leg width is 0.5 mm, and it is pre-soldered with the wired cable.

This LED assembly is compatible with a variety of applications, including panel-mount dash board indicators, car lighting, footwell lighting, grills, brake lights, turn signal lights, boats, architectural lighting, DIY hobbies, and replacement bezel clip holders.

product information: